If everything is good, it should display 'Interface Status: Found!' You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing! If test is not successful — check the following: Other software or devices using USB ports or that same COM Port could be conflicting.

Vagcom VCDS 16.8 as newest version HEX+CAN-USB interface diagnose cable for AUDI VW SEAT SKODA hot sales on eobdtool.com, and few customer feedback his VAG VCDS 16.8 installed and have a USB interface not found problem. Below our customer share the experience as follow for other customer reference. Here is problem you may also meet on your: This is the message I have when I click on the VCDS icon: And the program doesn”t run anymoreSometimes when it runs (.

Virtual COM Port Drivers Virtual COM Port Drivers for Ross-Tech USB Interfaces Older Ross-Tech RS-232 Serial interfaces can be set to power up as 'dumb K-Line pass through' interfaces. This allowed those old Serial interfaces to be compatible with a wide variety of third-party applications which expect a 'K-line pass-through' serial interface.

However, our USB interfaces present additional challenges. Early in their development, we found a number of technical advantages to using a 'direct' USB driver which bypasses the Windows Serial drivers entirely. Hence the USB drivers that ship with VCDS do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port. NOTE: The following applies to our legacy USB interfaces (HEX-USB, KII-USB and HEX-USB+CAN). It does NOT apply to our current HEX-V2 or HEX-NET interfaces. These new interfaces do not use a USB UART chip and cannot be be used for 'dumb K-line pass-through'!

In order to facilitate the use of third-party applications which expect to communicate with a serial interface, drivers that emulate a COM port are available. However, anyone thinking about using them needs to be aware of the following points: • We do not offer installation support for these drivers. They should be used only by someone who is competent/comfortable installing (and possible uninstalling) USB drivers on his PC.

• We cannot offer any support for third-party software, nor any guarantee that it will work correctly with these drivers. Of course, the same would apply with a serial interface as well. That said, here some installation notes: • These drivers are compatible with Windows 2000 and newer. They should work with W2K, XP-32, XP-64, Vista-32 and Vista-64. We do not have any VCP drivers for Windows 98!

• Unzip the contents of the download into a new folder. • With an interface plugged in, find it in Device Manager, right-click it, and select Update Driver. • Depending on what drivers your system already has installed, you may have to 'force' these by telling the wizard not to search, but to let you specify what driver to install, then doing the Have Disk and Browse thing.

• There's also the possibility that the Virtual COM Port won't install automatically. We've found no real pattern why it does on some systems and not on others. If it does not, find the interface in Device > Manager. The name should show '. Open the properties sheet, click the Advanced tab, and make sure Load VCP is checked.

Once checked, disconnect and re-connect the interface. • Once the USB Serial Port is installed, you may need to change the COM Port Number (depending on how high a number the applications supports).

Device Manager, Properties sheet for the USB Serial Port, Port Settings tab, Advanced button. The COM Port Number may change if you plug the interface into a different USB port, so I'd recommend always using the same USB port. Gopika two normal gujarati fonts for windows. • VCDS should continue to work fine with these drivers installed.

Altova semanticworks 2009 free download. Leave VCDS set to USB, not a Virtual COM Port! Assuming you've read and understand all of the above, you can download the 'Virtual COM Port' drivers here: Virtual COM Port Drivers Unless otherwise noted, all content on this site is Copyright (c) 2000-2017 by Ross-Tech LLC. All rights reserved. 'VCDS', 'VCDS-Mobile' and 'HEX-NET' are Registered Trademarks of Ross-Tech, LLC. Ross-Tech is not affiliated with the Volkswagen Group in any way.